4 in 1 Baby bed NORDIC 70x140 white

Additional bed / bedside crib 70x140 cm

Especially in the first few months you want to be close to your baby. You can convert the baby bed "NORDIC" into a bedside crib by attaching the slatted base at the highest or middle level (depending on the height of the parents bed), using the screws provided and removing one of the side lattices. Due to the specially designed construction, the slatted frame is fixed by limitations in the frame construction and can not fall out by itself. The mattress is placed on the slatted frame. The height of the slatted base should be chosen so that the mattress of the baby bed is "held" by the parental bed.

Baby bed / cot 70x140 cm

The height of the slatted base in the cot "NORDIC" can be adjusted in 4 heights. As soon as your baby can turn on its own, the middle position should be chosen. If your baby can then sit upright, the lowest position of the slatted base should be set. This cot is used until the child can independently get out of a cot and get back in. Then it's time to convert the baby bed into a junior bed.

Junior bed 70x140 cm

The cot can be quickly and easily converted into a junior bed by removing both side lattices and set the base on the middle or lowest level. On the lowest position mattress closes below the side edge of the side panel, which eliminates the need for protective rails. This gives your child a lot of freedom when sleeping and can easily get used to a normal bed. In case you chose the middle position for the junior bed, you will need additional protective rails which you can order separately.

2-person couch

Every child grows and sometimes faster than you think ... But where to put the baby bed if the child is already too big to sleep in? You can then convert the junior bed "NORDIC" to a 2-person couch. Set the slatted frame to the middle position and install back a side lattice, if they are off. The mattress is held by the edge of the side panel and prevented from sliding out. The slatted frame is handmade of real wood, stable and suitable for 2 people to sit. So you have a place for reading books with your child ...not always playing on the bed. You can complete this with a large canopy to make this one a dreamy place...

Slatted frame

It is made of 100% solid wood and thanks to the large gaps between the rails, the air can circulate very well, which is very important for a healthy sleep of your baby. You can adjust the slatted frame in 4 positions in height. Thanks to the solid screws and the metal thread incorporated in the walls of the cot, the screws grip and offer a safe sllep. This gives the already very solid baby bed an extra stability.

Using a Torx screwdriver the legs can be adjusted to match the correct direction.

Material & properties

Material: Solid wood & MDF semi-matte lacquered - white

Paint: Selected child-friendly varnish from Austria - complying with EN71-3

Feet: Solid handcrafted feet made of real cherry wood

Slatted frame: Solid beech wood lacquered (semi-matte white) included

Height adjustment: 4 positions

Convertible to (70x140 cm):

Bedside crib / cot / junior bed / 2-person couch

Mattress: Not included

Varnish properties:

ÖNORM A 1605-12 (furniture surfaces)

ÖNORM A 3800-1 & EN 13501-1 (fire behavior)

DIN 4102-B1 (flame retardant)

ÖNORM S 1555 or DIN 53160 (perspiration and saliva resistance)

ÖNORM EN 71-3 Safety of toys - migration of certain elements (heavy metals)

Child-friendly complying with EN 71-3

Insulating properties

Very scratch resistant

Water and dirt repellent

Heat & cold resistant

UV-resistant